RS82I/RS85I/RS79 Remote Starter Operating Instructions
You have purchased one of the most advanced remote starter systems ever made. Your new remote starter is a technological breakthrough utilizing the most advanced, state of the art technology and components. It is computer controlled and manufactured in the U.S.A. The dependability and variety of features make Bulldog Security the leader in the industry. Enjoy your new remote starter for years to come! This remote system is designed to start your vehicle by sending a command signal from the remote transmitter. It is important that your installation be done in a well-ventilated area. It is the responsibility of the owner to ensure that the remote system is not used to start the vehicle in an undesired location. It is recommended that a carbon monoxide detector be installed in the living area near a location where the vehicle may be garaged.
Start (with RS82I remote) Press and release button #1 the vehicle will remote start.Start (with factory keyless entry remote) Press and release the lock button on the remote 3 times, the vehicle will remote start. Stop (with RS82I remote) Press and release button #2 the vehicle’s remote starter will shut down. Stop (with factory keyless remote) Press and release the lock button on the remote, the remote starter will shut down. Pit Stop: Exiting the Car with the Engine Running (with RS82I remote) Make sure the transmission is in park, press and release button #1 (start) before turning the ignition switch off. (The engine will remain running for 15 minutes.) Pit stop: (with factory keyless entry remote) Press and release the lock button on the remote 3 times before turning the ignition switch off. (The engine will remain running for 15 minutes.)
Get pdf RS82I/RS85I/RS79 Remote Starter Operating Instructions
