03-Up Honda Pilot Step Bar Assemblies Installation Instructions
1. Remove contents and check for damage. Verify all parts are present. Read instructions completely before installation.
2. Locate driver side mounting locations on vehicle (See Figure 1and 2). Repeat for passenger side.
3. Attach driver side front and rear mounting brackets to underside of rocker panel as shown using M8 hex bolts, 5/16” flat washer and 5/16” lock washer. Hand tighten only (See Figure 1 and 2). Repeat for passenger side.
4. Place driver side step bar on saddles with Logo facing outwards. Assemble with 3/8” hardware. Hand tighten (See Figure 3 and 4). Repeat for passenger side.
5. Check step bars and brackets for proper alignment. Tighten and torque 3/8” hardware to 32 ft-lbs and M8 hex bolts to 25 ft-lbs.
Finish protection - Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax (pure carnauba, for example) on a regular basis. The use of cleaner wax or any compound which contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion.
Get pdf 03-Up Honda Pilot Step Bar Assemblies Installation Instructions
