BMW R1150GS Jumper Post Installation
In 2004 BMW started shipping the GS Adventurer with a feature that enabled the bike to be jumpstarted via a post attached directly to the starter. Prior to that you would have to remove the seat and try to access the battery which is located under the gas tank. Adding this feature to your bike is not that difficult and costs less than $30 in parts. The whole installation should take less than an hour with the majority of the time being spent locating and drilling the hole for the positive post in the starter cover.
• Start by removing the only screw that holds the starter cover and removing the cover to expose the starter
• Once the starter cover has been removed you will be able to access the only nut that you have to remove. It should be the upper nut but you should place a volt meter on it just to verify
• Place the bracket on the bolt so that its locking tab locks it into position….
Get pdf BMW R1150GS Jumper Post Installation
