Xenon Conversion Kit Installation Guide
Congratulations on your new EXeS Digital HID Conversion Kit! Please abide by your local transportation laws as this kit is intended for off road or show use purposes only. Please take your time in reading this guide as it will assist you in the installation process. Please pay attention to the exclamation marks as they have been added to alert you in an important part of the installation process and it is necessary to pay close attention to the notes following an exclamation mark.
NOTE: Some vehicles need special adapters, connectors, modules or harnesses.
It is up to the buyer to make sure that they have everything needed for their vehicle. BMW, Mercedes, Audi, Dodge/Chrysler and Volkswagen are only a few that may need special installation materials. Vehicles with DRL for the beam that HID will be installed on will need a direct power source like a relay harness with a sold chassis ground. Even the input on the relay harness negative should be grounded to the chassis or battery negative.
Pre‐Installation Instructions:
Disconnect battery prior to installation.
Before final installation pre‐test all the components. Ensure compatibility by plugging in all the wires and turning the system on (refer to the diagrams on page 4).
If you experience any problems, refer to our FAQ in the end of this guide.
( DRL ) Daytime Running Lights:
When checking for DRL issues remember to turn the vehicle on (do in a well ventilated area): For manual transmissions, be sure to release the parking brake. For automatic transmission remember to put the vehicle in first gear because this activates the DRL. (Keep your foot on the brake at all times) Resume testing.
If the bulb flickers during the test then turn them off immediately. Continued use will damage the bulb. Disable the day time running light system by removing the DRL relay or DRL fuse. Some vehicles you cannot disable the DRL and you will require a DRL relay harness. Contact your seller for details.
If you require a BMW harness, please be aware that they are polarity sensitive.
Get pdf Xenon Conversion Kit Installation Guide
