Software Manual for Bike 400
The Walbro Italy User Suite software package consists of four independent programs: GenTab, WinCons, DAct, and WAC. All but the WAC software are explained in this manual, since the use of the WAC telemetry tool requires additional hardware. Disclaimer: The in this manual described methods and procedures for setting up and tuning a Walbro Italy engine management system are to be understood as guidelines only. Walbro Italy does not take responsibility of any kind for damage to the engine and other equipment used in conjunction with the Walbro Italy ECU.
A. GenTab
The GenTab software is a user-friendly tool to build the ECU’s configuration and map file (.mpp file). It is used to set the environmental variables of the ECU as well as to view and modify the fuel and spark maps.
B. WinCons
The WinCons software is a user friendly tool to monitor and tune the engine. It has two purposes:
1. Numerical real-time monitoring of the engine parameters.
2. Establishing the injection, ignition, and idle valve planes during dynamometer testing.
C. DAct
The DAct software is a powerful and user friendly data acquisition tool. It has two purposes:
1. Downloading or analyzing the data from the on-board data logger.
2. Graphical and numerical real-time monitoring of the engine parameters. This manual will only cover the basic functions of the DAct software. A more detailed manual is available upon request.
Get pdf Software Manual for Bike 400
