Custom Search

Sun Machine 450 Serial C Pep Boys Unit Setup Installation Instructions

Sun Machine 450 Serial C Pep Boys Unit Setup Installation Instructions

Steps 1 through 6 will require two or more people.
1. Cut and remove the straps. Carefully slide the unit carton off the shipping pallet. Remove the top of the shipping carton.
2. Remove the carton by sliding the carton over top of the unit.
3. Remove foam packing from around the sides of the unit.
4. Lean the Sun Machine 450 so that half of the foam base can be removed.
5. Lean the Sun Machine 450 so that other half of the foam base can be removed.
6. Remove tape from ALL drawers and covers.
7. Remove bubble wrap from Keyboard, located in the keyboard drawer.
8. Inventory all items using the Parts & Accessories List and inspect for damage. The Unit Accessories are located in the bottom drawer of the unit. The Literature Kit is also located in the bottom drawer of the unit.
NOTE: Any software or hardware owners’ manuals and pre-loaded software that come with the computer, such as Microsoftо Windowsо 98 and the Sun Machine 450 Pep Boys operating Software Package are located in the bottom drawer of the unit.
NOTE: Any REGISTRATION CARDS for the installed software such as Microsoft Windows 98 must be filled out and sent in by the customer to ensure compliance with any software licensing agreements.
9. The boom is shipped in the lower position and will need to be raised to proper height.
10. Open the back cover of the unit, locate the boom journal and remove the stop bolt on the boom. Raise the boom approximately 7 inches to expose new stop bolt hole; place the stop bolt into the new hole.
11. Locate the shoulder screws (4100-5016-01); install the shoulder screws in the three holes at the bottom of the boom journal. The shoulder screw heads must be on the inside of the journal.
12. The monitor is shipped separately from the unit. Remove the monitor from the box and inspect the monitor for damage.
13. Remove the swivel base of the monitor if attached.
NOTE: If you are MOUNTING a 15” Sampo monitor, the Back Mounting bracket must be turned around as shown in Figure 1

Get pdf Sun Machine 450 Serial C Pep Boys Unit Setup Installation Instructions

Related Posts with Thumbnails